LOGIN / REGISTER
ACCOUNT DETAILSORDER HISTORYSAVED QUOTESLOG OUT
Pressure Tech Logo

Quality

System Certificates

ISO 9001: 2015
ISO 9001 is the international standard that specifies requirements for a quality management system (QMS).
Quality Assurance Notification
The Quality Assurance Notification is involved with the continued monitoring of systems and processes in relation to Ex products. It involves periodic audit of the manufacturing process by a qualified auditor. For ATEX certification, this is called a Quality Assurance Notification (QAN).
UK Quality Assurance Notification
This is our UK Quality Assurance Notification, valid until 6th July 2025. Equipment, protective system or components as listed: Instrumentation, Measurement and Control Equipment, Heated Regulators > Flameproof (d)
ATEX Statement of Exemption
Issued in accordance with 2014/34/EU — equipment and protective systems
intended for use in potentially explosive atmospheres.
IECEx Quality Assessment Report
The IECEx Quality Assessment Report (QAR) presents the results of an on-site assessment of a manufacturer’s quality management system by an ExCB, to the requirements of the IECEx Certified Equipment Scheme.
Conflict Materials Policy
In Accordance with Dodd-Frank Wall Street Reform and Consumer Protection Act, Section 1502. This statement concerns conflict minerals - minerals mined in conditions of armed conflict and human rights abuses, and which are sold or traded by armed groups.

PED Statement of Compliance
All current products defined under the Pressure Equipment Directive 2014/68/EU as ‘Pressure Accessories’, are below or equal to the limits set out in points (a), (b) and (c) of paragraph 1 and in paragraph 2 respectively, and have been designed and manufactured in accordance with Sound Engineering Practice (SEP) Article 4, Paragraph 3.

Product Certificates

API 17F (SS690 & SS691)
The testing of our SS690 and SS691 pressure regulators was carried out in accordance with API 17F (third edition), and approved test procedures.
API 17F (2G Electric Actuator)
Remote inspection during Electromanetic Compatibility tests on the 2G Electric Actuator. The testing was carried out in accordance with API 17F (section 9.2.3.2.6), IEC 60533:2015 and client approved test procedures.
CRN for Manitoba
The Canadian Registration Number (CRN) is a unique number issued by each province or territory in Canada for any boiler, pressure vessel or fitting that operates at a pressure greater than 1 barg (15 psig). The approval applies to our LF, MF, RF and BP series pressure regulators.
CRN for Northwest Territories
The Canadian Registration Number (CRN) is a unique number issued by each province or territory in Canada for any boiler, pressure vessel or fitting that operates at a pressure greater than 1 barg (15 psig). The approval applies to our LF, MF, RF and BP series pressure regulators.
CRN for British Colombia
The Canadian Registration Number (CRN) is a unique number issued by each province or territory in Canada for any boiler, pressure vessel or fitting that operates at a pressure greater than 1 barg (15 psig). The approval applies to our LF, MF, RF and BP series pressure regulators.
CRN for Saskatchewan
The Canadian Registration Number (CRN) is a unique number issued by each province or territory in Canada for any boiler, pressure vessel or fitting that operates at a pressure greater than 1 barg (15 psig). The approval applies to our LF, MF, RF and BP series pressure regulators.
CRN for Ontario
The Canadian Registration Number (CRN) is a unique number issued by each province or territory in Canada for any boiler, pressure vessel or fitting that operates at a pressure greater than 1 barg (15 psig). The approval applies to our LF, MF, RF and BP series pressure regulators.
CRN for Alberta
The Canadian Registration Number (CRN) is a unique number issued by each province or territory in Canada for any boiler, pressure vessel or fitting that operates at a pressure greater than 1 barg (15 psig). The approval applies to our LF, MF, RF and BP series pressure regulators.
CV414-SC - TPED 2010/35/EU
TPED 2010/35/EU certification is required for applications involving the transportation of pressure equipment including gas cylinders and their valves. The CV414-SC's TPED approval applies for up to 350 bar (5,075 psi).
Flameproof Enclosure — EU-Type Examination Certificate
A supplementary EU-Type Certificate covering 'Empty Enclosues Series CCA and GUB for Electrical Equipment'. Required for components intended for use on/in equipment or protective system(s) intended for use in potentially explosive atmospheres - Directive 2014/34/EU.
AUTO438 - EC-Type Approval Certificate (EC79)
EC-type approval certificate permitting our AUTO438 pressure regulator commercial use on hydrogen fuel cell vehicles.
BP 301 Series: Manufacturer's Statement
Please note that due to implementation of a new ERP system, the part number for Pressure
Tech BP 301 series regulator BP-301-5-SS-20-V-P-02N-N has hereby been changed to BP301-05-S-20-V-P-02N-N.

Membership Certificates

BVAA Membership Certificate
Established in 1939, the British Valve and Actuator Association represents the interests of over 200 British companies which are responsible for over £1billion sales each year. The membership is involved in more than 50 different committees whose areas of study cover a wide spectrum on the valve and actuator industry.

Call UsX

If you need to discuss an application
or project, request a price or if you
have any other query, we are available
to speak from Monday to Friday
from 08:30 to 17:00 (UK time). Or arrange a video call with a
member of our sales team:

REQUEST A VIDEO CALL

Ask A QuestionX

SUBMITTEDX

Thank you for submitting a pricing request. A
member of our sales team will respond to you
shortly.

In the meantime, if you have any further questions
please contact us on: or

SUBMITTEDX

Thank you. A member of our sales team will respond
to your question shortly.

In the meantime, if you have any further questions
please contact us on: or

TitleX

Message

This website uses cookies